tzm5221b to tzm5267b www.vishay.com vishay semiconductors rev. 1.7, 22-nov-12 1 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? very high stability ? electrical data identical with the devices 1n5221b to 1n5267b ? low reverse current level ?v z - tolerance 5 % ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 1.7 to 20 ma v z specification thermal equilibrium int. construction single ordering information device name ordering code taped units per reel minimum order quantity tzm5521b to tzm5267b tzm5521b to tzm5267b-series-gs18 10 000 (8 mm tape on 13" reel) 10 000/box tzm5521b to tzm5267b tzm5521b to tzm5267b-series-gs08 2500 (8 mm tape on 7" reel) 12 500/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions minimelf sod-80 31 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation r thja = < 300 k/w p tot 500 mw zener current i z p tot /v z ma junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c forward voltage (max.) i f = 200 ma v f 1.1 v
tzm5221b to tzm5267b www.vishay.com vishay semiconductors rev. 1.7, 22-nov-12 2 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) based on dc measurement at thermal equilibrium; case temperature maintained at 30 c 2 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range (1) test current reverse leakage current dynamic resistance temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 tk vz f = 1 khz v ma a v ? %/k nom. typ. typ. tzm5221b 2.4 20 0.25 < 100 1 < 30 < 1200 < - 0.085 tzm5222b 2.5 20 0.25 < 100 1 < 30 < 1250 < - 0.085 tzm5223b 2.7 20 0.25 < 75 1 < 30 < 1300 < - 0.080 tzm5224b 2.8 20 0.25 < 75 1 < 30 < 1400 < - 0.080 tzm5225b 3 20 0.25 < 50 1 < 29 < 1600 < - 0.075 tzm5226b 3.3 20 0.25 < 25 1 < 28 < 1600 < - 0.070 tzm5227b 3.6 20 0.25 < 15 1 < 24 < 1700 < - 0.065 tzm5228b 3.9 20 0.25 < 10 1 < 23 < 1900 < - 0.060 tzm5229b 4.3 20 0.25 < 5 1 < 22 < 2000 < 0.055 tzm5230b 4.7 20 0.25 < 5 2 < 19 < 1900 < 0.030 tzm5231b 5.1 20 0.25 < 5 2 < 17 < 1600 < 0.030 tzm5232b 5.6 20 0.25 < 5 3 < 11 < 1600 < + 0.038 tzm5233b 6 20 0.25 < 5 3.5 < 7 < 1600 < + 0.038 tzm5234b 6.2 20 0.25 < 5 4 < 7 < 1000 < + 0.045 tzm5235b 6.8 20 0.25 < 3 5 < 5 < 750 < + 0.050 tzm5236b 7.5 20 0.25 < 3 6 < 6 < 500 < + 0.058 tzm5237b 8.2 20 0.25 < 3 6.5 < 8 < 500 < + 0.062 tzm5238b 8.7 20 0.25 < 3 6.5 < 8 < 600 < + 0.065 tzm5239b 9.1 20 0.25 < 3 7 < 10 < 600 < + 0.068 tzm5240b 10 20 0.25 < 3 8 < 17 < 600 < + 0.075 tzm5241b 11 20 0.25 < 2 8.4 < 22 < 600 < + 0.076 tzm5242b 12 20 0.25 < 1 9.1 < 30 < 600 < + 0.077 tzm5243b 13 9.5 0.25 < 0.5 9.9 < 13 < 600 < + 0.079 tzm5244b 14 9 0.25 < 0.1 10 < 15 < 600 < + 0.082 tzm5245b 15 8.5 0.25 < 0.1 11 < 16 < 600 < + 0.082 tzm5246b 16 7.8 0.25 < 0.1 12 < 17 < 600 < + 0.083 tzm5247b 17 7.4 0.25 < 0.1 13 < 19 < 600 < + 0.084 tzm5248b 18 7 0.25 < 0.1 14 < 21 < 600 < + 0.085 tzm5249b 19 6.6 0.25 < 0.1 14 < 23 < 600 < + 0.086 tzm5250b 20 6.2 0.25 < 0.1 15 < 25 < 600 < + 0.086 tzm5251b 22 5.6 0.25 < 0.1 17 < 29 < 600 < + 0.087 tzm5252b 24 5.2 0.25 < 0.1 18 < 33 < 600 < + 0.088 tzm5253b 25 5 0.25 < 0.1 19 < 35 < 600 < + 0.089 tzm5254b 27 4.6 0.25 < 0.1 21 < 41 < 600 < + 0.090 tzm5255b 28 4.5 0.25 < 0.1 21 < 44 < 600 < + 0.091 tzm5256b 30 4.2 0.25 < 0.1 23 < 49 < 600 < + 0.091 tzm5257b 33 3.8 0.25 < 0.1 25 < 58 < 700 < + 0.092 tzm5258b 36 3.4 0.25 < 0.1 27 < 70 < 700 < + 0.093 tzm5259b 39 3.2 0.25 < 0.1 30 < 80 < 800 < + 0.094 tzm5260b 43 3 0.25 < 0.1 33 < 93 < 900 < + 0.095 tzm5261b 47 2.7 0.25 < 0.1 36 105 < 1000 < + 0.095 tzm5262b 51 2.5 0.25 < 0.1 39 125 < 1100 < + 0.096 tzm5263b 56 2.2 0.25 < 0.1 43 150 < 1300 < + 0.096 tzm5264b 60 2.1 0.25 < 0.1 46 170 < 1400 < + 0.097 tzm5265b 62 2 0.25 < 0.1 47 185 < 1400 < + 0.097 tzm5266b 68 1.8 0.25 < 0.1 52 230 < 1600 < + 0.097 tzm5267b 75 1.7 0.25 < 0.1 56 270 < 1700 < + 0.098
tzm5221b to tzm5267b www.vishay.com vishay semiconductors rev. 1.7, 22-nov-12 3 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indentification 0.47 (0.019) max. 2.5 (0.098) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print re commendation: * * the gap between plug and glass can be either on cathode or anode side document no.:6.560-5005.01-4 rev. 8 - date: 07.june.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
